Automatic Pipe and tube Sawing Machine which as both material feeding and cutter feeding source as servo motor. This fully automatic machine can create 1000 different cutting programs. Each programs will have information such as your given name, nos of pipes in bunch which will be cut, appropriate RPM for the same and defined cutter path with variable cutter travel such as T1, T2, T3 (slow cutter feed at larger load and faster cutting feed at lower load in one single or bunch of pipes). 5 different length combination (within 6 m), and applied cutter thickness. Once this data is created as programmed, then it just needs to be recalled from the drop down when you change Job. This reduces 80% of your changeover time, same from human errors and most important, archives best blade life and least cutter cycle time. total length tolerance is maintained with +/-0.1mm. with exact cut piece counting even with bunch cutting. Machine software has many interlocks which prevents many human errors which is responsible for cutter breakage other accidents. Machine as fully automatic lubrication system which will keep lubricating the all the required parts of the machine on regular intervals. Administrator has full control on the machine utility including data of hours of machines usages and 3 different counters.